 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
| Makita DPC7311 Gas Cut Off Saw Gas Power Concrete Cutter |
Makita DPC7311 Gas Cut Off Saw Gas Power Concrete Cutter
Technical Details
Improved 5-Stage air filtration system is 80% larger that before.
Microchip controlled carburetor adjusts to work load.
Quick-action guard adjustment and easy cutting arm position change.
Compression release valve for easy starting.
Single knob access to primary air filter and spark plug.
Features
Five-stage, foam-paper-nylon system with Advanced Directional Air Flow provides very clean air for better saw
performance
Reinforced aluminum blade guard with 70° range of limitless positioning using a marked knob handle
Improved ignition system with larger flywheel and rare earth magnets for more power
Cutting arm position simply changes from center position to flush (outboard) position allowing cuts directly
adjacent to curb edges, walls or directly above the ground
Starter grip and decompression valve located on the same side for faster starting
On-Off-Choke operating switch on a single lever for operator convenience
Cushioned operator grips with 4 vibration-absorption rubber buffers for increased operator comfort
Water kit is assembled to saw and can be used with garden hose, gravity tank or pressure tank
Improved exhaust emissions are EPA Phase II compliant while maintaining power and performance
Specifiactions
Engine
Displacement (cu.in.) 4.5
Max. power (HP) 5.6
No Load RPM 9,350
Fuel
Fuel mixture 50:1
Fuel tank capacity (oz.) 37
Blades
Max. spindle speed 4,300
Wheel diameter 14"
Arbor 1" (w/adaptor)
Max. cutting depth 4-13/16"
Net Weight (lbs.) 22.0
Shipping Weight (lbs.) 28.0
Product Description
From the Manufacturer
The Makita DPC7311 14" power cutter offers a fresh new design that enhances performance and provides greater
operator comfort. This 73cc power pack is loaded with new technological innovations such as the micro-chip
controlled carburetor that compensates engine timing to work load. The new and improved 5-stage air filtration
system has been enlarged by 80% to ensure cleaner air for better performance, even in the dustiest conditions.
Better filtration means less down time for maintenance and more production time. Makita also beefed up the
aluminum blade guard with pressure plates for reduced vibration and wear. The DPC7311 is equipped with a spring
tensioned belt adjustment w/gauge to always ensure proper belt tensioning. Compression release, single knob
access to primary air filter and spark plug and a 2-mass dampening system for reduced vibrations makes this the
industry leader when it comes to Power Cut saws. You expect the best from Makita - and you get it.
Product Description
Makita, 73 CC Power Cutter, Powerful 73 CC Engine With Exceptional Fuel Efficiency, Microchip Controlled
Carburetor Designed To Compensate Engine Timing According To Work Load, Large Volume Exhaust Ported To
Direct Debris Away From Operator, Aluminum Guard & Wheel Pressure Plates To Reduce Weight, Limitless
Positioning Of Guard Within 70 Degrees Range Of Rotation, Quickest Cutting Arm Position Change Available,
Externally Positioned Clutch With Vented Housing For Cooler Operation, Compression Release Valve Reduces
Force Required To Start By 70%.
Technical Details
Improved 5-Stage air filtration system is 80% larger that before.
Microchip controlled carburetor adjusts to work load.
Quick-action guard adjustment and easy cutting arm position change.
Compression release valve for easy starting.
Single knob access to primary air filter and spark plug.
Features
Five-stage, foam-paper-nylon system with Advanced Directional Air Flow provides very clean air for better saw
performance
Reinforced aluminum blade guard with 70° range of limitless positioning using a marked knob handle
Improved ignition system with larger flywheel and rare earth magnets for more power
Cutting arm position simply changes from center position to flush (outboard) position allowing cuts directly
adjacent to curb edges, walls or directly above the ground
Starter grip and decompression valve located on the same side for faster starting
On-Off-Choke operating switch on a single lever for operator convenience
Cushioned operator grips with 4 vibration-absorption rubber buffers for increased operator comfort
Water kit is assembled to saw and can be used with garden hose, gravity tank or pressure tank
Improved exhaust emissions are EPA Phase II compliant while maintaining power and performance
Specifiactions
Engine
Displacement (cu.in.) 4.5
Max. power (HP) 5.6
No Load RPM 9,350
Fuel
Fuel mixture 50:1
Fuel tank capacity (oz.) 37
Blades
Max. spindle speed 4,300
Wheel diameter 14"
Arbor 1" (w/adaptor)
Max. cutting depth 4-13/16"
Net Weight (lbs.) 22.0
Shipping Weight (lbs.) 28.0
Product Description
From the Manufacturer
The Makita DPC7311 14" power cutter offers a fresh new design that enhances performance and provides greater
operator comfort. This 73cc power pack is loaded with new technological innovations such as the micro-chip
controlled carburetor that compensates engine timing to work load. The new and improved 5-stage air filtration
system has been enlarged by 80% to ensure cleaner air for better performance, even in the dustiest conditions.
Better filtration means less down time for maintenance and more production time. Makita also beefed up the
aluminum blade guard with pressure plates for reduced vibration and wear. The DPC7311 is equipped with a spring
tensioned belt adjustment w/gauge to always ensure proper belt tensioning. Compression release, single knob
access to primary air filter and spark plug and a 2-mass dampening system for reduced vibrations makes this the
industry leader when it comes to Power Cut saws. You expect the best from Makita - and you get it.
Product Description
Makita, 73 CC Power Cutter, Powerful 73 CC Engine With Exceptional Fuel Efficiency, Microchip Controlled
Carburetor Designed To Compensate Engine Timing According To Work Load, Large Volume Exhaust Ported To
Direct Debris Away From Operator, Aluminum Guard & Wheel Pressure Plates To Reduce Weight, Limitless
Positioning Of Guard Within 70 Degrees Range Of Rotation, Quickest Cutting Arm Position Change Available,
Externally Positioned Clutch With Vented Housing For Cooler Operation, Compression Release Valve Reduces
Force Required To Start By 70%.
Makita DPC7311
Gas Cut Off Saw Gas Power Concrete Cutter
In The Box
14" Cut-off wheel (965-210-222)
Diamond Blade on Picture is Optional
Universal wrench (941-719-140)
Torx wrench (940-827-000)
Screwdriver (944-340-001)
Adaptor Ring (22 mm to 1") (394-228-120)
Gas Cut Off Saw Gas Power Concrete Cutter
In The Box
14" Cut-off wheel (965-210-222)
Diamond Blade on Picture is Optional
Universal wrench (941-719-140)
Torx wrench (940-827-000)
Screwdriver (944-340-001)
Adaptor Ring (22 mm to 1") (394-228-120)
| Makita DPC6410 Gas Cut Off Saw Gas Power Concrete Cutter |
| Makita DPC6411 Gas Cut Off Saw Gas Power Concrete Cutter |
| Makita DPC7310 Gas Cut Off Saw Gas Power Concrete Cutter |
| Makita DPC7311 Gas Cut Off Saw Gas Power Concrete Cutter |
| Makita DPC8112 Gas Cut Off Saw Gas Power Concrete Cutter |
| Makita 4112H Electric Cut Off Saw Angle Concrete Cutter |
| Makita 4114 Electric Cut Off Saw Angle Concrete Cutter |
